CONTROLLED TUBE CUT-OFF LATHES

SETS UP FAST FOR QUICK CHANGEOVER.  Most machine adjustments are programmable from the operator station.

USES STANDARD CNC PROGRAMMING

OPERATES FAST, EFFICIENTLY, AUTOMATICALLY

CONSTANT SURFACE FOOTAGE SPINDLE DRIVE provides significant productivity gains over conventionally controlled machines. 30 HP is standard, 40 HP optional.

IDEAL FOR SHORT OR LONG RUNS on heavy wall tubing from ¼" to 8" O.D. and solid bar stock up to 3¼" diameter.

USES STANDARD, COMMERCIALLY AVAILABLE CARBIDE INSERT TOOLING in place of expensive form tools.

100% FANUC CONTROLS, SERVOS AND SPINDLE DRIVE with CRT monitor and pendant mounted operator control panel. (Allen-Bradley controls are optional.)

CUT LENGTHS UP TO 48" with standard stop support beam. (Longer beams are available.)

RIGID BEAM STOCK STOP. The stop is moved along linear bearings by a crank-operated ball screw, using a digital readout for setting the length position. It is locked and unlocked in position by a selector switch-operated power clamp. As an option, the stop can be automatically positioned by servo control. This allows programming a variety of different part lengths from the same bar for efficient use of material.

FEED RATES are positive, precise, programmable.

TOOL WEAR TIMERS indicate when tools need replacing.

TWO CROSS SLIDES, fed by independent servo drives and ball screws, move perpendicular to the spindle. While one slide cuts off, the other performs O.D. chamfering or O.D. plunge turning. One I.D. can also be chamfered or light form cut.

AUTOMATIC FEEDER holds large bundles of tube, pipe and bar stock.

STANDARD EQUIPMENT includes roller feed assembly, automatic lubrication of main spindle bearings, high volume coolant pump and piping, fused disconnect and cycle counter.