" Your Band Saw Blade & Band Saw Machine Specialists "

bandsawblade.com - Wayco Sales, Inc. band saw blade & circular saw blades & machines. Marvel, Simonds, Dake, Kalamazoo, Arntz, MK Morse, DeStaCo, and more.

 www.bandsawblade.com ] Contact Us ] Contents ]

 

Home

Online Store

Band Saw Blades

Circular Saw Blades

De-Sta-Co Clamps

Abrasives

Vertical Bandsaws

Horizontal Bandsaws

Circular Saws

Ironworkers

Plate Saws

Modern Machine

Simonds Files

Dake Presses& Equip

More Great Products

Sale Items

 

 

We accept :

Use your AMEX, Visa, or M/C to purchase your Coldsaw Blade.

 

 

Trouble-shooting and  Break-in procedure guides for band saw blades

 

Wayco Sales, Inc. - Metal Cutting & Fabrication Equipment & Supplies

 

 

www.destacoclamp.com

www.sawbladestore.com

 

Kalamazoo Industries, Inc.

7" Abrasive Cut-Off Saw - 1 HP

8" Cut-Off Saw - 3HP

 

Model K7B

 

·  Cast iron base
·  Rigid alignment

Handles 1" solid round, 2" pipe. Adjustable work length stop and down stop furnished. 1/2" wheel arbor.

 

Model K8B

·  Cast iron base
·  More capacity, cuts 1˝" solid, 2" pipe
·  Rigid alignment
·  Spark deflectors, front and rear, standard

K7B 7" CUT-OFF SAW with 1 HP TEFC motor 110/220V single phase, cord and plug, switch, less abrasive wheel. 75 lbs. 3450 RPM 6000, SFM   K8B 8" CUT-OFF SAW with 3 HP TEFC motor (110/220V 1-phase or 220/440V 3-phase - please specify), switch, less abrasive wheel 90 lbs. 3450 RPM, 6000 SFM  

10" Abrasive Cut-Off Saws - 3 HP

·  Swivel vise opens 4" - fast, lever-lock

·   5/8" arbor, sealed-for-life bearings

·  Capacity 1-1/2" solid, 2-1/2" pipe

Available with heavy steel floor stand and foot-operated chain vise (in place of swivel vise).

3 HP TEFC motor (110/220V 1-phase or 220/440V 3-phase - please specify), switch, vise, less abrasive wheel (5/8" bore). 3450 RPM, 7200 SFM

Model K10B
K10B      Bench Saw, swivel vise... 120 lbs.
K10S      Saw, swivel vise, steel stand... 165 lbs.
K10SF    Saw, chain vise, steel stand... 170 lbs.
K10SW   Saw, swivel vise, steel stand
               with tray-top (wet)...
190 lbs.

 

12" - 14" Abrasive Cut-Off Saws - 5 HP

Model K12SS

These heavy-duty saws handle 2-˝" solid round stock (3" pipe) with speed and efficiency.

·  Extra heavy cast-iron base, trunnion and overarm

·  Sealed ball bearing, 1" wheel arbor

·  Positive, quick-lock swivel vise, opens 4"

·  Dual V-belt drive

·  5HP TEFC motor, 3 phase 220/440 volt. Please specify

·  3450 RPM, 14000 SFPM

·  LESS ABRASIVE WHEEL

  12" Saw Weight 14" Saw Weight
Bench Saw, swivel vise, manual switch K12B 205 lbs. K14B 210 lbs.
Floor Saw, swivel vise, manual switch K12SS 265 lbs. K14SS 270 lbs.
Floor Saw, chain vise, manual switch K12SSF 270 lbs. K14SSF 275 lbs.

12" - 14" Cut-Off Saw - Wet Top - 5 HP

·  Heavy-duty cast iron arm and trunnion

·  5 HP 3 PH

·  Twin cam vises

·  Heavy-duty base

·  Coolant system 10 Gal.

·  Uses 12" or 14" wheel

·  Optional work length stop

·  Capacity 2-1/2" solid, 3" pipe

Model K12-14W

MODEL K12-14W - WET CUT-OFF SAW - 5 HP, 3 PH 220/440 with magnetic switch - coolant system, 10 gal - two cam lock vises and splash guards - less wheel - Weight 590 lbs. - FOB Kalamazoo.

MODEL KWL - WORK LENGTH STOP - Weight 5 lbs.

OPTIONAL MOTOR SPEED - 1725 or 3450 RPM. Please Specify.

16" - 18" Cut-Off Saw - 10 HP

·  Rugged, cast iron trunnion and overarm - super rigid, super accurate

·  Fast, foot-operated chain vise

·  1" wheel arbor, sealed ball bearings

·  Heavy-duty guards, efficient spark chute

Model K16-18

Specifications
Capacity - solid bar...     3"
              - pipe, other shapes...     4"
Table...     16" wide x 28" deep
Wheel arbor, diameter...     1"
Vise, foot-operated...     chain
Drive motor, TEFC, 3-phase...     10 HP
Shipping weight...     625 lbs.
K16-18 - 16" - 18" SAW with 10 HP TEFC motor (220/440V 3-phase - specify voltage) manual starter with overload, less abrasive wheel. 1725 RPM, 10400 SFPM

20" Abrasive Cut-Off Saw - 15 HP

Model K20SSF

The 20" / 15 HP abrasive saw has the built-in balance and rigidity - the power and operating ease - to produce more work, at lower cost.

·  Rugged, cast iron trunnion and overarm - super rigid, super accurate.

·  Fast, foot-operated chain vise

·  1" wheel arbor, sealed ball bearings

·  Heavy-duty guards, efficient spark chute

·  Powerful 15 HP drive, multiple v-belts.

Specifications
Capacity - solid bar...     4"
             - shapes...     6"
Table...     18" wide x 30" deep
Wheel arbor, diameter...     1"
Vise, foot-operated...     chain
Drive motor, TEFC, 3-phase...     15 HP
Shipping weight...     675 lbs.

 

 

K2OSSF - 20" CUT-OFF SAW, with 15 HP TEFC motor (220/440V 3-phase - specify voltage), manual starter with overload, adjustable down stop, less abrasive wheel. 1725 RPM, 13000 SFPM

WL-20 - WORK LENGTH STOP, adjustable. Automatically clears work as wheel is advanced.

20" Cut-Off Saw - Wet Top - 15 HP

Semi-Automatic 10" Saw - 3 HP

·  Air Chain ViseModel K20SW
·  Coolant Pump
·  Table - 27 x 30
POWER FEED NOT STANDARD
Model K10PHV·  Air-over-oil, precise feed control
·  0 to 12 fpm
·  Big capacity - 1-1/2" solid, 2" pipe
·  Air-operated swivel vise
·  EASY SET-UP SIMPLE OPERATION
K2OSW - 20" CUT-OFF SAW 15HP 220/440 3PH (Specify voltage).  Standard Equipment: Magnetic switch, air chain vise, coolant pump, less abrasive wheel.  Optional Equipment: 2OHP, work stop, power down feed, as shown above.  Wt: 875 lbs.   K1OPHV - SEMI-AUTOMATIC 10" CUT-OFF SAW, with 3HP TEFC motor (220/440V - 1-phase or 3-phase, specify voltage), manual starter, power down feed, air vise, regulator, pressure gauge, with stand, less abrasive wheel.   3450 RPM, 7200 SFPM  Wt: 255 lbs.  

26" Cut-Off Saw - 20 HP

· 20 HP TEFC - Standard
· Two cam vises - 4-1/2" high
· Cog belt drive
· Spindle speed 1800 RPM
· 7" flanges
· 1" arbor
· Table - 32" x 42" x 26" high
· Opening in guard 9" x 16"
· Heavy safety guard
· Cuts angles up to 45° by shifting fence
· Down stop specs: cuts 7" pipes, 5" solids, 8" shapes, 12" channels

Model K26S

MODEL K26S - 20HP/3 phase - with magnetic switch, shipping weight 900 lbs. FOB Kalamazoo. 1725 RPM, 15000 SFPM. Options Available - power down feed, wet tray with coolant pump, oscillation on head, vacuum dust collector.

26" Totally Enclosed Cut-Off Saw - 20 HP

· 26" abrasive saw
· 20 HP, 3 PH motor
· Cam vise
· Cog belt drive
· Totally enclosed with 6" outlet
· Power down feed - air/oil, 0-12 FPM
· 1" wheel arbor, 7" flanges
· 1800 RPM spindle speed
· Capacity 7" pipe, 5" solids, 8" shapes
· Dimensions - L 61" x W 48" x H 92"
MODEL K26E - 20 HP motor with mag switch.  Totally enclosed.  Wt. 1700 lbs.  Options available:  wet/coolant system, vacuum dust collector, oscillation.

30" Cut-Off Saw - 30 HP

· 30" abrasive saw
· 30 HP, 3 PH motor
MODEL K30PH - 30 HP motor

Hi-Speed - Non Ferrous 14" Saw

Model HS14

FOR CUTTING ALUMINUM AND OTHER
NON-FERROUS MATERIAL WITH STEEL BLADE

· OSHA safety wheel-guard Clamshell
· Heavy cast iron base, trunnion and arm
· Capacity - 4" square, round and shapes. 3" solid
· Abrasive blade can also be used
· Manual switch
· 1" Spindle-sealed ball bearings
· 5 HP 3 phase 220 or 440 volt motor (single phase also available) 1725 RPM motor - 6250 SFPM or 3450 RPM motor - 12500 SFPM
· Double v-belt drive
· Two easy-set screw vises. Opens 5" and holds work on both sides

Model HS14 - 14" High Speed "straight-cut" non-ferrous saw.  5 HP, 3 PH 220 or 440 volt. Motor RPM 1725 or 3450.  (Please specify voltage and motor RPM when ordering.) Wt. 240 lbs.
Heavy Duty Abrasive Cut Off Saws are designed for production requirements.

 

 

Disclaimer:

 Some of the information used on the pages within this website are adapted from literature from suppliers (including, but not limited to: Armstrong-Blum Mfg Co./ Marvel Mfg Co., Arntz Inc., De-Sta-Co, Hyd-Mech, FLEXOVIT, Kalamazoo, M.K. Morse Co., Modern Machine Tool Co, Simonds International, United Abrasives / SAIT).    

All use of Original Equipment Manufacturers Names and Part Numbers is for reference only.

We are not directly affiliated with any Original Equipment Manufacturers.  Wayco offers Quality AfterMarket parts.

Marvel®  is a registered trademark / copyright of Marvel Mfg, Inc.

These are not genuine MARVEL® parts. Wayco Sales Incorporated has no affiliation with Marvel Mfg Co.