COLD SAW MATRIX LEGEND

COLD SAW MATRIX LEGEND

	Mild steel. Cold/Hot Rolled Solid material. Low carbon Leaded steel	ALL MODELS
	Tough alloy Solid stainless steel. (Small Diameter) Tool steel (M-2) Inconel/Hastelloy/Titanium	ALL MODELS 350/370 MODELS 370 MODELS (limited)
	Mild steel tube and pipe Cold and hot rolled tube/pipe low carbon	ALL MODELS
	Tough alloy steel tube thin wall (depending on tube diameter) Stainless steel tubing up to 3/8" wall. Alloy tube with over 3/8" wall	ALL MODELS 350/370 MODELS
	Mild steel square or rectangular tube Low carbon steel tube. To fit capacity of machine.	ALL MODELS
	Non-Ferrous Material Aluminum solids, Brass, Copper Bronze, Lead, Plastic. To fit capacity of machine. IDEAL MACHINE IS THE 370 L MODELS	ALL MODELS
	Non-Ferrous Tubing Aluminum solids, Brass, Copper Bronze, Lead, Plastic. To fit capacity of machine. IDEAL MACHINE IS THE 370 L MODELS	ALL MODELS
	Non-Ferrous Extrusions Aluminum solids, Brass, Copper Bronze, Lead, Plastic. To fit capacity of machine. IDEAL MACHINE IS THE 370 L MODELS	ALL MODELS

Note: Thin wall tubing, and non-ferrous materials should always be cut o

NOTE: When cutting non-ferrous materials the Euromatic 370 PP/L-S/L with a precision ground blade at 3000 rpms, will give optimum finish.
WARNING: It is not advisable to run a high speed steel blade higher than 1500 rpms.
WARNING: Steel must not be cut on the PP/L or S/L models.

n the highest speeds.

Home

Circular Saw Blades

De-Sta-Co Clamps

Vertical Bandsaws

Horizontal Bandsaws

Circular Saws

Ironworkers

Plate Saws

Modern Machine

Simonds Files

Dake Presses& Equip

More Great Products

Sale Items