M.K. Morse Bi-Metal Band
Saw Blades
|
Bi-Metal
- Matrix II
|
|
FEATURES
|
ADVANTAGES
|
BENEFITS
|
| Matrix II High Speed
Steel Edge Tooth Hardness Rc 66-68
8% Cobalt
Alloy Steel Backer
Positive Rake |
High Heat Resistance High
Wear Resistance
Prevents Tooth Damage
Fatigue Resistant
Increased Tooth Penetration |
Longer Life than
Carbon Blades Higher Production
Faster Cutting |
|
|
|
| Applications |
Specifications |
General purpose bi-metal for efficient production cutting of materials with mild
to moderate machinability.
Solids, shapes, tubing, and structural materials.
Best choice for bundled or stacked pieces.
Cuts alloy steels (annealed or heat treated), tool steels, stainless steels, air
hardening die steels |
Width
x Thickness
|
Teeth Per
Inch |
Standard
Tooth
Raker Set |
Wavy
Set |
Variable
Pitch |
Variable
Pitch
Positive Rake |
Hook
Tooth |
| Inches |
mm |
| 1/4 x .025 |
6.4 x .6 |
10, 14 |
|
10/14 |
|
6 |
| 3/8 x .025 |
9.5 x .6 |
8, 10, 14 |
|
|
|
4 |
| 1/2 x .020 |
12.7 x .5 |
10 |
14, 18, 24 |
10/14,
14/18, 20/24 |
|
|
| 1/2 x .025 |
12.7 x .6 |
6, 10, 14, 18 |
|
6/10, 8/12,
10/14, 14/18 |
|
3, 4 |
| 5/8 x .035 |
16.0 x .9 |
10, 14 |
|
5/8, 6/10, 10/14 |
|
|
| 3/4 x .035 |
19.0 x .9 |
6, 8, 10, 12, 14 |
|
5/8, 6/10,
8/12, 10/14 |
4/6 |
3 |
*1 x .035 |
27.0 x .9 |
4, 6, 8, 10, 14 |
|
3/4, 4/6, 5/8, 6/10,
8/12, 10/14 |
3/4, 4/6 |
3 |
*1¼ x .042 |
34.0 x 1.1 |
4,6 |
|
3/4, 4/6, 5/8, 6/10, 8/12 |
2/3, 4/6 |
2,3 |
*1½ x .050 |
41.0 x 1.3 |
|
|
2/3, 3/4, 4/6, 5/8 |
2/3, 3/4, 4/6 |
|
|
|
 Top of the page
Bi-Metal - M42 Cobalt
|
|
FEATURES
|
ADVANTAGES
|
BENEFITS
|
| M42 High Speed Steel
Cutting Edge Tooth Hardness Rc 67-69
8% Cobalt
Alloy Steel Backer |
High Heat Resistance High
Wear Resistance |
Longer Life on
Difficult to Cut Material Less Blade Changes
Highest Production Rates in Select Materials |
|
|
|
| Applications |
Specifications |
For the toughest production cutting jobs in controlled cutting
conditions.
Efficient cutting in solids with very low machinability.
NOT recommended for structural materials, stacked or bundled
materials or for machines with varied applications or operators.
Cuts "super" alloys, tool steels, inconel, waspalloy,
hastelloy, "D" grade steels, etc. |
Width
x Thickness
|
Teeth Per
Inch |
Standard
Tooth
Raker Set |
Variable
Pitch
Regular |
Variable
Pitch
Positive Rake |
Hook
Tooth |
| Inches |
mm |
| ¾ x .035 |
19.0 x .9 |
|
6/10 |
|
|
| *1 x .035 |
27.0 x .9 |
4, 6, 8 |
5/8, 6/10 |
2/3, 3/4, 4/6 |
3, 4 |
| *1¼ x .042 |
34.0 x 1.1 |
4, 6 |
5/8 |
2/3, 3/4, 4/6 |
3, 4 |
| *1½ x .050 |
41.0 x 1.3 |
4 |
5/8 |
2/3, 3/4, 4/6 |
|
Note:
*Bi-Metal bands marked 1", 1¼", and
1½" are oversized to fit both U.S. and metric saws. |
| Description |
| Nominal
Size |
Actual
Size |
1"
|
1.083" |
1¼"
|
1.360" |
1½"
|
1.635" |
|
|
|
|
